|
|
|
Level-Rite
Installation Instructions
|
- Clean floor,
removing all oil, grease and debris.
- Bring Machine
into location and raise sufficiently to allow mounts to be positioned
under the mounting feet.
- Remove the
leveling bolts from the mounts. Properly orient the lock washers
and hex.nuts on the bolts.
- Position
mounts (with bolt holes aligned with holes in machine feet), insert
leveling bolts through bolt holes in the machine feet, and screw
them into the mounts.
- Adjust each
mount with the leveling bolt so the pad extends below the mount
housing approximately 1/4".
- Lower machine
onto mounts so all mounts accept as uniform loading as possible.
- Locate the
mount housing closest to the floor and elevate it 1/8" to
1/4" off the floor. Level the machine by adjusting the other
mounts using the first mount as the point to reference.
- Tighten nuts
and lock washers, thus securing machine feet to mounts.
|
| Specification |
|
Model
|
Max
Load
(lbs)
|
A
|
L
|
W
|
H
|
Standard
Bolt
Size
|
Max.
Mach.
Foot Th.
|
|
LR-2500
|
2.27
|
7.78
|
5.50
|
3.50
|
2.50
/ 3.88
|
M12
x 1.75 x 150
|
2.27
|
|
LR-5000
|
2.08
|
7.77
|
7.00
|
4.50
|
2.50
/ 3.88
|
M16
x 2 x 150
|
2.08
|
|
LR-7500
|
1.91
|
7.88
|
8.00
|
5.00
|
2.50
/ 3.88
|
M20
x 1.5 x 150
|
1.91
|
|
LR-12000
|
3.65
|
9.94
|
8.00
|
5.88
|
2.50
/ 3.88
|
M24
x 2 x 200
|
3.65
|
|
LR-16000
|
3.40
|
10.32
|
10.00
|
7.88
|
2.50
/ 3.88
|
M24
x 2 x 200
|
3.40
|
|
LR-25000
|
3.53
|
10.74
|
12.50
|
9.00
|
3.50
/ 4.88
|
M30
x 2 x 200
|
3.53
|
|
LR-35000
|
4.52
|
11.09
|
16.00
|
12.50
|
4.50
/ 5.88
|
M36
x 2 x 250
|
4.52
|
|
Wilrep Ltd.
email: request@wilrep.com
Tel: (905)625-8944 Fax:(905)625-7142
Toll Free: 1-888-625-8944
|
