|
|
|
Regufoam
Isolation Pad Material |
 Regufoam
is a high quality
PUR foam specially developed and formulated to attenuate
noise and vibrations from all sources ranging from
general mechanical plant to hi-tech railway systems.
Regufoam products are highly adaptable, acoustically
superior and ar 100% recyclable.
|
|
Applications: |
Industrial:
Used for active isolation of machinery, such as lathes,
presses, sensitive measuring equipment and all areas
where noise is a general nuisance. Highly recommended
to isolate inertia pits and foundation blocks.
Infrastructure:
Rail, road and tunnel construction.
Civil:
Can be used in the foundation of buildings to isolate
the structure from ground-borne noise and vibration.
General M & E Plant:
Provides excellent acoustic properties when isolating
general mechanical plant such as, pump and lift motors,
air conditioning units, etc.
Construction:
Excellent impact resistance properties.
Can be used to isolate timber batteries, stair treads
and general floating floors from impact sound.
|
| Benefits: |
- Excellent
acoustic properties.
- can
be used as simple a/v mounts or structural isolation.
- Can
be used for very light loads, achieving high damping
ratios and low natural frequencies.
- Capable
of achieving a natural frequency as low as 7 Hz.
- Available
in 6 different varieties with densities ranging
from 150kg/m3. Section is very much load dependant.
- Standard
thickness of 12mm and 25mm, other thickness available
on request.
- Low
compression ratio, combined with excellent resilience.
- Excellent
recovery properties.
- Long
term life span.
- 100%
recyclable.
|
| Regufoam |
150 |
220 |
300 |
400 |
510 |
680 |
| Colour |
Beige |
Purple |
Turquoise |
Brick
Red |
Orange |
Brown |
| Density
(kg/m3) to DIN53420 |
150 |
220 |
300 |
400 |
510 |
680 |
| Load
Bearing Range |
0.01 |
0.025 |
0.05 |
0.1 |
0.2 |
0.4 |
| Bedding
modulus (N/m3) to DIN 18134* |
0.0038 |
0.011 |
0.025 |
0.037 |
0.072 |
0.327 |
| Compression
set (%) to DIN 53572** |
2.5 |
<4.0 |
2.2 |
2.4 |
2.8 |
2.9 |
| Tensile
strength (N/mm3) to DIN 53571 (minimum value) |
0.42 |
0.56 |
0.78 |
1.3 |
1.5 |
2.47 |
| Elongation
at break (%) to DIN 53571 (minimum value) |
270 |
260 |
240 |
290 |
260 |
310 |
| Tear
resistance (N/mm) to DIN 53515 ( minimum value) |
2.65 |
3.38 |
4.85 |
7.38 |
8.28 |
14.4 |
| Mechanical
Loss factor to DIN 53513 |
0.25 |
0.20 |
0.14 |
0.1 |
0.1 |
0.08 |
| Inflammability
to DIN 4102 |
B2 |
B2 |
B2 |
B2 |
B2 |
B2 |
| Static
Modulus Of Elasticity (N/mm2) |
0.025-0.16 |
0.05-0.38 |
0.14-0.75 |
0.39-1.27 |
1.49-2.25 |
3.0-3.9 |
| Dynamic
Modulus of Elasticity (N/mm2) DIN 53513^ |
0.11-0.32 |
0.3-0.69 |
0.6-1.3 |
1.07-1.8 |
2.63-3.35 |
4.8-5.6 |
| Permanent
static load range (N/mm2) |
0-0.01 |
0-0.025 |
0-0.05 |
0-0.1 |
0-0.2 |
0-0.4 |
| Permanent
and variable static load range (N/mm2) |
0-0.15 |
0-0.035 |
0-0.08 |
0-0.15 |
0-0.3 |
0-0.6 |
| Rare
& short term loads / loads peaks (N/mm2) |
Up
to 0.5 |
Up
to 1.0 |
Up
to 2 |
Up
to 3 |
Up
to 4 |
Up
to 5 |
* Measured at a maximum load of 0.10N/mm2 and a material
thickness of 25mm.
**
Measured 30 minutes after decompression with 50% deformation/23°C
after 70hrs.
^
Dependant on load frequency.
For more information call 1-888-625-8944
|
|
|
|
Back
to top
Wilrep Ltd.
email: request@wilrep.com
Tel: (905)625-8944 Fax:(905)625-7142
Toll Free: 1-888-625-8944
|
