A Big Impact on Interior Environment

Today's lightweight structures pose many challenges for architects and engineers. Impact sound reduction within multi-level units is imperative in meeting building codes and delivering high levels of acoustic control and privacy for interior space.

Highest IIC Rating
While many methods for reducing sound impact are available, no one product, on a stand alone basis, can match the IIC (Impact Insulation Class) ratings of QT- Sound Insulation. A sheet product, in continuous lengths, made from 100% recycled rubber, QT achieves higher impact sound reduction ratings then the industry according to ASTM standards E989-89 and E492-90. With IIC product ratings up to 25, QT - Sound Insulation outperforms cork, polyethylene, fiberglass and nylon matrix.

Lowest System Height
The QT- Sound Insulation single ply system not only ranks as the largest contributor to impact sound reduction, but also offers one of the lowest system heights in the industry. It doesn't need a suspended ceiling to produce required IIC ratings and eliminates the need for ramping between rooms while allowing floor and ceiling heights to be increased.

Guaranteed Results QT- Sound Insulation's
Certified System Guarantee assures a required IIC rating for your specified construction

 
    Hardwood        Vinyl          Laminate        Stone            Tile

Versatile
Product range and versatility are important to builders and architects alike. QT- Sound Insulation offers two thickness options that products exceptional results under hard surface flooring and over concrete and wood joist constructions. Custom thickness' are also available.

The Power of QT- Sound Insulation IIC
The chart below illustrates the QT IIC contribution to a variety of flooring constructions.

Floor Structure & Finish	Without QT	QT (21IIC) 5mm (31/16")	QT (25IIC) 10mm (3/8")
Bare 6" Concrete with Ceramic Tile	27	48	52
Bare 6" Concrete with Hardwood	27	51	55
Bare 6" Reinforced Concrete with Ceramic Tile	32	53	57
Bare 8" Concrete with Hardwood	35	59	63

A BIG IMPACT ON EXTERIOR ENVIRONMENTS
Dodge-Regupol, Inc (DRI), an international joint venture between the former Dodge Cork Company of Lancaster, PA and BSW, a German recycling products manufacturer, has revolutionized the recycled rubber market in North America. With state-of-the-art technology geared for high volume output, DRI produces some of the most innovative, low cost, environmentally-friendly rubber and foam products in the industry.

Putting waste back to work.
All Dodge-Regupol products are easy on the environment. DRI uses discarded tires to produce innovative products that have put mountains of old tires back to work reducing noise in our living and working environments, cleaning up America's vistas of unsightly waste. Everybody wins with Dodge-Regupol products.